Kitset Boats by NZ Ply Boats

Boat Specs Hull LOA 14ft-4.2M Beam 1.8M Draft 190mm Displacement 240kg (with motor) Freeboard 600mm Bow WL 850mm Basic Materials list (included with kitset) Ply Cut- Hull & Deck 9mm, Floor 12mm, Transom 18mm Timber- Keel 3D cut 18mm x 180mm, Doublers 18mm x 18mm, Rub Strip 40mm x 20mm, Epoxy- West Systems (with instruction manual) Glue (2 pot), 8lt (2 hour window), 1-1 metering pumps,12 lt microfibres, Timber sealer 8 lt, Caulking gun cartridges, Disposable brushes, Coving tool. Screws- Silicon Bronze, Construction screws (disposable) Fittings- Towing Eye, 2 x Bungs, 2 x Deck Scuppers Construction Drawings- Full Written instructions and on-line/phone support Transport Costs Courieror or pick up at buyers expense Ply Cut- available from Hibiscus Coast. This is 4 metres long (requires truck or tandem trailer, we can arrange) Timber- available through your nearest CARTERS branch with order no. supplied by us. West Systems,Epoxy products- Couriered from West Systems (Henderson Akl) or pick up Miscellaneous ( fittings etc)- Delivered at our expense! We can also build a boat for you: Paint Stage, Fully Painted, Turn key Fittings- We can supply a full range from B.L.A. Motors- Yamaha (full range), Sails (6-40hp) Finance available for full turn key package with Yamaha outboard NOTE: DESIGN IS PROTECTED UNDER COPYRIGHT LAW. BOAT IS IDENTIFIED BY A 3D SERIAL NUMBER TATTOOED IN TRANSOM.

Howard Smith

• Mangawhai Heads
• Nothland

09 945 0057

021 075 9997